DESCRIPTION: 

Bitumen-Rubber-based, two-component bitumen material which elasticity and tensile strength reinforced with special additives.

INTENDED USES AND PROPERTIES:

•  KM-2K, external insulation of foundation, cellar and basement walls on all horizontal and vertical surfaces,
•  Under the coating in terrace insulation,
•  Used for the isolation of leachate in closed and wet areas such as bathrooms, kitchens and toilets.
•  Used with insulation mesh, fabric etc. in insulation applications that must withstand larger cracked surfaces or high-water pressure.
•  Provides a high-performance waterproofing by forming single solid insulation layer.
•  Provides good adherence to dry and low moisture surfaces.
•  Provides advantage with its easy and fast application consistency.
•  It is cold applied; no heating or thinning is required.
•  Has permanent elasticity, easily covers shrinkage cracks.
•  Resistant to positive water pressure.
•  Plaster or mortar can be applied on it, provided that it is sandblasted.
•  Has high capacity of crack coverage.
•  Since the product does not contain solvent and asbestos fibre, it can be safely applied in closed areas.

CONSUMPTION:

Usage area Min. application thickness Consumption Areas subject to soil dampness (non-accumulating ground water) 2 mm 3 kg/m² Insulation against temporary water-pressure 3 mm (with a fibreglass mesh) 4.5 kg/m² Areas subject to permanent water-pressure (ground water) 4 mm (with a fibreglass mesh) 6 kg/m²

COMPLEMENTARY PRODUCT(s): 

•  REPAIR SW Waterproof structural repair mortar Active water sealant
•  STOPPER Active water sealant
•  BA-100 Bitumen & Water based membrane primer
•  LTX Latex